HRRSDental DX. Light Cure Orthodontic Adhesive Kit

whatsapp ‪+8613056145518‬

PACKAGE:
Orthobond Light Cure Adhesive Paste,Orthobond Light Cure Adhesive Primer, DX.Etch 37,Accessories.

Indications: Designed for bonding orthodontic brackets.

INSTRUCTIONS:
(1) Tooth preparation: Rinse teeth with water and dry with oil-free air.

(2) Acid Etching: Apply DX. Etch 37 to tooth surfaces, wait for 30s, rinse with water and dry. The enamel has the chalky appearance after etching.

(3) Applying Primer: Use the brushes to apply thin uniform coat of primer on each tooth surface to be bonded (The very thin
film of primer is necessary), wait for 10 seconds, use a gentle stream of air to evaporate the solvent for 5 seconds, light cure for 20 seconds.

(4) Applying Paste: Apply a small amount of adhesive paste onto bracket base, immediately and lightly place bracket onto tooth surface. Adjust bracket to final position, press firmly to seat bracket. Gently remove excess adhesive from around the bracket base.

(5) Light curing : For metal bracket: Hold the curing light stationary at a distance of 2-3 mm above interproximal contact, light cure for 20 seconds to both sides.

FOR CERAMIC BRACKET:
Hold the curing light stationary at a distance of 2-3 mm above perpendicular to ceramic bracket, light cure for 20 seconds.

WARNING:
Do not use this product for patient who is allergy to
methymethacrylate. Do not use this product with any material contained eugenol.

PRECAUTIONS:
Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention.Avoid flam.

STORAGE:
Store at 25 '℃ or less in a cool and dry place and avoid direct sun exposure. Recap the bottle after use.

SHELF LIFE:3 years