HRRSDental DX. Dental Universal Light Cure Hybrid Composite Resin A1 A2 A3 A3.5 1pcs 4g

whatsapp ‪+8613056145518‬

(1)Preparation: isolate and prepare tooth.

(2) Cleaning:rinse the preparation with water.

(3) Drying: gently air dry until there is no visible water. Do not allow enamel or dentin to dry for an excessive period of time.

(4)Applying DX.BOND VII Self-Etching Light Cure Adhesive(DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 secondsDSA should not be applied too much).

Use a gentle stream of air to evaporate the solvent for 5 seconds.

(Ifusing a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction)

(5) Cure: light cure for 20 seconds at more than 500mW/cm² Keep the distance to exposure surface less than 4 mm

(6)Applying DXUniversal/Anterior/Posterior Nano Hybrid Light Cure Composite: place selected composite into cavitypreparation following by light cure.

According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended.

In general1-2mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.

(7)Finishing: after light cure, adjust restoration.

(8)Polishing: use polishing strip or dis to polish the surface

WARNING:
Do not use this product for patient who is allergy to
methylmethacrylate.

Do not use this product with any material contained eugenol.

ATTENTION:
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.

STORAGE:
Store at 4-25Cin a cool and dry place and avoid direct sun exposure. Recap the syringe after use.

SHELF LIFE: 3 years