HRRSDental DX. Enamel Anterior Teeth Restoration Nano Hybrid Light Cure Composite

whatsapp ‪+8613056145518‬

APPEARANCE: High viscous paste

FUNCTION:
After filling, a blue light initiates a quick free radical polymerization generating an organic resin and inorganic filler composite which demonstrates a great strength and aesthetic appearance as real tooth. Due to its high radiopacity, a clear X-ray picture will be helpful for clinic practice.

INDICATIONS FOR USE:
All Restorations for posterior and anterior; Core build up; In-lay and on-lay; Veneer repairs.

INSTRUCTIONS:
(1) Preparation: isolate and prepare tooth.

(2) Cleaning: rinse the preparation with water.

(3) Drying: gently air dry until there is no visible water. Do not
allow enamel or dentin to dry for an excessive period of time.

(4) Applying DX.BOND VII Self-Etching Light Cure Adhesive
(DSA): dispense 1-2 drops of DSA into a mixing well, apply
enough DSA to the entire preparation with a little brush until a
shiny surface is achieved and then wait for10 seconds (DSA
should not be applied too much ).

Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive,an etching step should be used according to the manufacturer's instruction).

(5) Cure: light cure for 20 seconds at more than 500mW/cm
Keep the distance to exposure surface less than 4 mm.

(6) Applying DX.Universal/Anterior/Posterior Nano Hybrid
Light Cure Composite: place selected composite into cavity preparation following by light cure.

According to following table, the curing time is recommended for different depth and color shades.

In order to reduce shrinkage stress,for a large cavity, an increment filling is recommended.

In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally.

Each increment is light cured for 30 seconds.

(7) Finishing: after light cure, adjust restoration.

(8) Polishing: use polishing strip or disc to polish the surface.

WARNING:
Do not use this product for patient who is allergy to
methylmethacrylate.

Do not use this product with any material contained eugenol.

PRECAUTIONS:
Methmethacrylate resins may cause skin sensitization in
susceptible persons.

In case of contact, wash skin with soap and water. In severe situation, get medical attention.

ATTENTION:
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.

STORAGE:
Store at 4-25 Cin a cool and dry place and avoid direct sun exposure. Recap the syringe after use.

DISPOSAL:
After the product is used up, dispose it as normal medical rubbish.

SHELF LIFE:3 years