HRRSDental DX. Dental Composite Material Composite Flowable Resin（Medium Flow）2g/pcs

whatsapp ‪+8613056145518‬

Medium Flow: A1, A2，A3

APPEARANCE: Light yellow viscous paste.

FUNCTION:

After preparation and filling,a blue light will be applied to initiate a quick free radical polymerization generating an organic resin and inorganic filler composite which demonstrates a great strength and aesthetic appearance as real tooth.

INDICATIONS FOR USE:

Ideal for Class III,Class V and some smaller non-stress-bearing Class IV restoratives;

Pit and fissure sealant;

Indirect in-lay and on-lay;

Porcelain repairing.

INSTRUCTIONS:

(1) Preparation: isolate and prepare tooth.

(2)Cleaning:rinse the preparation with water.

(3) Drying: gently air dry until there is no visible water. Do not allow enamel or dentin to dry for an excessive period oftime.

(4)Applying DXBOND VI Self-Etching Light Cure Adhesive DSA):dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds(DSA should not be applied to much).

Use a gentle stream ofair to evaporate the solvent for 5 seconds Ifusing a non self-etching manufacturer's instruction) adhesive, an etching step should be used according to the

(5)Cure: light cure for 20 seconds at 500+ 50m W/cm2. Keep the distance to exposure surface less than 4 mm.

(6)Applying DX.FLOW Nano Flowable Light Cure Composite(FLC): place selected FLC into cavity preparation following by20 seconds light cure.

The depth of cure is about 2.5mm for 20 second cure.(In order to ro educe shrinkage stress, for a large cavity, an increment filling g is recommended.

In general,1-2 mmincrements are placed intocavity preparation from different sides and the restoration 1 s built incrementally. Each increment is light.

(7)Finishing: after light c ure, adjust restoration.

(8) Polishing: use polishir ing strip or disc to polish the surface.

WARNING:

Do not use this product for patient who is allergy to

methylmethacrylate.

Do not use this product with any material contained eugenol.

PRECAUTIONS:

Methmethacrylate resins may cause skin sensitization in susceptible persons.

In case of contact, wash skin with soap and water. In severe situation, get medical attention.

ATTENTION:

To an exposed pulp,a pulp capping material such as Calcium hydroxide may be used before using this product.

STORAGE:

Store at 4-25C in a cool and dry place and avoid direct sun exposure.

Recap the syringe after use.

SHELFLIFE: 3 years

STANDARD: IS0 4049:Dentistry-Polymer-based filling restoration and luting materials